Get a quote Text Us 
Industrial coatings
Industrial coatings for plants, warehouses and steel.
We paint and coat working buildings: plants, warehouses, steel structures and equipment.
Every surface needs the right coating. Rusted steel, galvanized ceilings and plant walls each get their own primer and finish.
We plan the work around your schedule, so your operation keeps running.
- Bonded & insured
- WorkSafeBC procedures
- Since 1934
- 4.9 on Google (19 reviews)
Industrial coatings we apply
-
Dryfall ceilings
Spray coating for joists, deck and ducts. It dries before it reaches the floor.
-
Safety yellow and bollards
Bright yellow on bollards, guardrails, stairs, dock edges and low steel.
-
Protective coatings for steel
Rusted or peeling steel cleaned and recoated. On exterior stairs, we used one coating that works as both primer and finish.
-
Warehouse interiors and exteriors
Walls, ceilings, columns, concrete panels and loading bays, done in sections around your shipping.
-
Food and pharma plant walls
We've worked in many food and pharmaceutical facilities: washable coatings for walls and processing rooms, done around production. Ask us for our reference list.
-
Fire-retardant coatings
Coatings that slow the spread of flame on indoor surfaces, where your building or insurer needs them.
Also covered under industrial coatings
-
Tank linings
Linings for the inside of tanks, chosen for what the tank holds.
-
Pipe colour coding
Pipes, tanks and equipment painted in their service colours, so fire, gas, air and water lines can be told apart at a glance.
-
MIO aluminum coatings
Micaceous iron oxide aluminum coatings for exterior steel such as roof hatches, ductwork and equipment housings.
-
Chemical-resistant and food-grade coatings
Systems that stand up to cleaners, chemicals and wash-downs, including food-safe products for processing areas.
-
Pre- and post-inspection coatings
Recoating before an inspection, or fixing what an inspector flagged afterward.
-
Small bridges, overpasses and towers
Steel and concrete structures that need access equipment and a durable exterior system.
Safety yellow, coated steel and rust repairs can be maintained under an ongoing contract. Maintenance contracts →
One company for the whole coating job
We aren't tied to one brand. We look at the surface, how the space is used and what it's exposed to, then choose the coating system that fits. You don't need to research coatings or write a spec: we choose the system, do the prep, apply it and clean up.
Coatings we apply
- Zinc-rich and rust-preventive primers for steel
- Epoxy coatings for steel and concrete
- Tank linings and chemical containment for chemical and industrial tanks
- Polyurethane and polyaspartic topcoats for exposed steel, railings and equipment
- Industrial enamels and direct-to-metal (DTM) finishes, including safety yellow
- High-heat coatings
- Dryfall ceilings
- Hygienic wall and ceiling systems for food and pharmaceutical plants
- Line and traffic marking paint
Brands we use include Sherwin-Williams, Cloverdale Paint, Benjamin Moore, Dulux and Fabrikem, a Langley, BC company.
Who we do this for
Plant managers, facility and maintenance managers, and owners of warehouses and light industrial buildings. Most of our industrial work happens while the building stays open.
Our industrial work
How an industrial job runs
-
Site visit
We look at the surfaces, the access and how your operation runs, and price it.
-
Coating system
We pick the primer and finish for the surface and its use, and tell you what we'll apply.
-
Prep
Cleaning, rust removal, etching galvanized steel or repairing cracks: whatever the surface needs to hold the coating.
-
Application
We work in sections, after hours if needed, and leave each area ready to use.
Safety: How our crews work safely
Where we do this work: Horseshoe Bay to Chilliwack, with a lot of industrial work in Port Kells, Annacis Island, Richmond and Delta.
Industrial Coatings services Dryfall CeilingsSafety Yellow and Bollards
Common questions
Can you coat while our plant keeps running?
Yes. We plan the work in sections and around your shifts and shipping, so production doesn't have to stop.
Have you worked in food and drug plants?
Yes, many. We've painted inside dairies, bakeries, a chocolate maker, food processors, an egg plant, a beverage bottling plant and a pharmaceutical plant. Email or call us and we'll send our reference list of plants.
How do you choose the right coating?
It depends on the surface and what it faces. Rusted steel, galvanized ceilings, plant walls and tanks each need their own primer and finish, and we match the system to the job.
How do I get a quote for industrial coatings?
Call 604-861-6644 or send a request with the site address and what needs coating. We'll walk the site with you and price it.
Do your crews follow WorkSafeBC procedures?
Yes, on every job. Crews stay harnessed in boom lifts, and our safety page lists the tickets our workers carry.
Looking for a free quote?
Tell us about your building and the work you need. We’ll get back to you to set up a site visit.
- Bonded & insured
- Member in good standing of DC38
- Red Seal painters
- Lead trained by the Hazardous Materials Association of BC