Free quote

Tell us about your project.

Tell us about your building and the work you need. We’ll get back to you to set up a site visit. Prefer to talk? Call 604-861-6644.

Text us

By sending a request, you confirm you have read the privacy policy.

Protective coatings

Protective coatings for steel, concrete and masonry.

Rain, rust and spray paint wear a building down a little more every year.

We put a protective coating on each surface: corrosion protection on steel, clear sealers and anti-graffiti coatings on brick, stone and concrete, and elastomeric coatings on exterior walls.

Book a site visit →

Protective coatings we apply

  • Corrosion protection on steel

    Rusted steel cleaned back, primed and topcoated so the rust stays gone.

    Rust removal and steel coatings

  • Anti-graffiti coatings

    Clear anti-graffiti coatings on bare brick and concrete, so tags clean off more easily.

  • Concrete and masonry sealers

    Clear sealers and water repellents on bare brick, stone and concrete.

  • Elastomeric wall coatings

    Thick, flexible coatings for exterior walls.

Who this is for

Facility and property managers, building and warehouse owners, and engineers and general contractors. We can work around your tenants and operations, including nights and weekends.

How a protective coating job runs

  1. Go over each surface

    Steel, brick, stone and walls each need something different.

  2. Clean and prep

    Each surface is prepped for the coating it's getting.

  3. Apply

    The coating for each surface goes on.

  4. Check and hand over

    We walk it with you and hand over our written guarantee.

See the full process, step by step

For facility and property managers planning protective coatings, here is every step we follow, from the first walk to the handover.

  1. 1. Going over each surface

    We walk the building with your facility or property manager. Steel, concrete, brick and painted walls each need something different, so we note what every surface is, what shape it's in, and what it needs protecting from.

    • Walk-through with your manager
    • Each surface and its condition
    • What it needs protecting from
  2. 2. Safety

    Work at height is done from lifts run by trained operators, with harnesses on boom lifts and every lift checked before use. Your site rules and WorkSafeBC requirements are part of the plan, safety data sheets stay on site, and anyone on the crew can stop the job.

    • Trained lift operators
    • Harnesses on boom lifts
    • Site rules and WorkSafeBC
    • Safety data sheets on site
    • Anyone can stop the job
  3. 3. Matching coating to surface

    The written scope pairs each surface with its coating and its prep: an SSPC / AMPP level for steel, and the data sheet or your spec for the rest. You approve it first.

    • Each surface paired with its coating
    • Prep set for each
    • Your approval first
  4. 4. Timing

    Exterior coatings need the right conditions, so we plan around the forecast as well as your tenants and operations, including nights and weekends where needed.

    • Planned around the weather
    • Around tenants and operations
    • Nights and weekends where needed
  5. 5. Prep

    Steel is cleaned back with hand and power tools. Brick, stone and concrete are cleaned so sealers and anti-graffiti coatings can soak in or bond.

    • Steel cleaned back
    • Masonry and concrete cleaned
  6. 6. Conditions

    Surfaces have to be dry, at least 3°C above the dew point, and inside the data sheet's temperature and humidity limits before anything goes on.

    • Dry surfaces
    • At least 3°C above the dew point
    • Inside the data sheet limits
  7. 7. Applying

    Each coating is applied the way its data sheet says, by brush and roll, airless spray or HVLP, with recoat times from the data sheet.

    • Applied to the data sheet
    • Brush and roll, airless or HVLP
    • Recoat times followed
  8. 8. Checking

    Film build on steel is checked with wet film and DFT gauges, adhesion is tested, and we walk every surface with you before sign-off.

    • Wet film and DFT gauges on steel
    • Adhesion tests
    • Walk-through with you
  9. 9. Handover

    Equipment and protection come out, the site is cleaned up, and you get our written guarantee.

    • Equipment out
    • Site cleaned up
    • Written guarantee

Standards: Every protective coating is applied to its manufacturer's data sheet and MPI standards, on a surface prepared the way that data sheet asks for.

Safety on these jobs: Work at height is done from lifts run by trained operators, and any worker can stop the job if something isn't safe. Lifts, Stop work authority

Where we do this work: Commercial and industrial buildings across Metro Vancouver and the Fraser Valley.

More industrial coatings services Industrial Coatings Dryfall CeilingsSafety Yellow and BollardsRust Removal and SteelPipe Colour CodingTank and Equipment PaintingFood and Pharma WallsChemical-resistant CoatingsTank Linings

Related Roof and exterior coatingsWarehouse painting

Common questions

Don't see your question?

Call 604-861-6644 Talk to a painter

What protective coatings do you apply?

Corrosion protection on steel, anti-graffiti coatings, concrete and masonry sealers, and elastomeric wall coatings.

Do you seal bare brick and concrete?

Yes. We apply clear sealers and water repellents to bare brick, stone and concrete, and clear anti-graffiti coatings where walls get tagged.

Can you protect steel that's already rusting?

Yes. The rust is cleaned back with hand and power tools first, then the steel is primed and topcoated.

How much do protective coatings cost?

We price protective coating work after a free site visit. The price depends on the size and type of each surface, its condition and the prep it needs, the coating, and how we reach it. You get a written quote before any work starts, and the price only changes if the scope changes or work is added or removed.

Four-storey building with restained wood columns and beams at the entrance

Looking for a free quote?

Tell us about your building and the work you need. We’ll get back to you to set up a site visit.

Phones answered 7am–7pm, every day. Quote requests are acknowledged the same day.

  • Bonded & insured
  • Member in good standing of DC38
  • Red Seal painters on our crews
  • Lead jobs done by lead-trained crews

Tell us about your project.

By sending a request, you confirm you have read the privacy policy.