Get a quote Text us Langley Townhome Complex Repaint
Case study · Strata · Langley
An exterior repaint of a strata townhome complex in Langley. Our crews washed the buildings and our long-term carpentry partners made the wood repairs. Then our crews repainted the siding, gables, trim, fascia and front doors, and sanded and refinished every deck.
The work ran in phases, one group of buildings at a time, while residents stayed in their homes. Residents got a written notice before each phase, and front doors were painted on scheduled days. The whole complex was completed in under two months, in 2026.
Safety on jobs like this: Ladders are inspected before each use, and our scaffolds are built to carry at least four times their intended load. Scaffolding, Ladders
Planning similar work?
Price my project →Case study: how a job like this runs
Every strata repaint follows the same ten steps. On a townhome complex, they run like this.
-
Walk-around with council
We walk the complex with council or the property manager and look at siding, trim, doors, railings and fences, any rotten wood, and access around each building.
-
Scope and quote
The quote sets out the scope by surface and the coating for each one. Wood repairs are priced separately, so council can see what the repairs cost.
-
Building-by-building schedule and notices
Work moves building by building. Residents get notice before washing and painting, with time to close windows and clear decks and patios.
-
Site safety and protection
A trade-qualified foreman runs the site. Lift and ladder work follows WorkSafeBC requirements, including fall protection. Work areas are barricaded, plants and fixtures are covered, and plywood goes down under lifts on soft ground.
-
Wash, repair and prep
Every surface to be painted is washed. Failing paint is scraped and sanded, failed caulking is replaced, and our long-term carpentry partners replace rotten wood.
-
Inspection before coating
The foreman checks that washed surfaces are dry and that repairs and caulking are finished before any coating goes on.
-
Primer
Bare wood is spot primed with a wood primer. Doors get a full coat of bonding primer.
-
Two finish coats
Siding and trim get two coats of premium satin. Rails and fences get two coats of stain, and doors get two coats of semi-gloss.
-
Cleanup and restoring the site
Coverings come off, fall-protection anchor holes are patched and painted, and equipment and waste leave the property.
-
Final walk-through and handover
We walk the buildings with council or the property manager. On jobs that call for it, an MPDA inspector reviews the work as well.
Standards: Painted under MPDA guidelines to MPI standards, with each product applied to the manufacturer's instructions and the site run to WorkSafeBC requirements.
Project photos
More strata projects
Before & after Strata Trim Repaint
This was a smaller strata maintenance project involving targeted wood repairs and a trim repaint. With a two-person crew, we were able to complete the work efficiently, on schedule, and within the strata’s budget.
Strata Maintenance Program
This was a larger strata maintenance project involving more extensive wood repairs and a full trim repaint across multiple buildings. Due to the increased scope, a larger crew was deployed and the work was completed over a longer schedule while maintaining efficiency and consistency throughout.
Looking for a free quote?
Tell us about your building and the work you need. We’ll get back to you to set up a site visit.
Phones answered 7am–7pm, every day. Quote requests are acknowledged the same day.
- Bonded & insured
- Member in good standing of DC38
- Red Seal painters on our crews
- Lead jobs done by lead-trained crews